High Temp Red Gasket Maker was formulated to handle heavy duty applications and extreme temperature conditions (intermittent -65°F to 650°F, ((-54°C to 343°C)).
Directions :
- Use on clean & dry surfaces for best results
- After applying 2 to 6mm of silicon, assemble parts immediately while silicon is still wet. Finger tighten until material begins to squeeze out around flange
- Let dry for 1 hour then tighten to torque specifications
- Allow 24 hours to fully cure before fully cure before filling with fluids or returning to service
Note :
- Not recommended for use on head gaskets or parts in contact with gasoline